What is the meaning of ureal?
The process of major repairs of industrial equipment, including petrochemicals, refineries, power plants, etc. in the network, is called overhaul. This process includes fundamental repairs or reconstruction, before breaking or breaking down the device and the device's equipment. In fact, overhaul has the role of preventing punctures, breakages and accidents and explosions in equipment of various industries. Major repairs in refineries and the petrochemical industry means repairing and renovating the equipment of those units and updating the required hardware, which is necessary and unavoidable periodically. Among the basic steps of this process, we can mention equipment inspection, insulation and checking of sensitive units.
The purpose of urealing
The purpose of overhaul is to prevent or deal with possible damages in light and heavy industrial machines. Any type of industries and equipment such as refineries and petrochemical industries will suffer damage over time and need repairs. These repairs prevent the situation from getting worse and somehow guarantee the health and safety of the systems. In general, the purpose of overhaul can be stated as follows:
internal cramps
The most problems that may be caused to the equipment is scaling. This blockage is caused by the following reasons: A large part of this clogging mass consists of iron sulfur and is the result of the contact of petroleum substances with the surface of equipment and parts. Heavy polymer materials and coke can be mentioned among the materials that cause clogging and blocking of paths. If this problem is not addressed at the first opportunity, it can also cause an accident. One of the places that get clogging and deposits are refinery coolers, and their scale must be removed.
surface cramps
Occasionally, clogging may occur on towers and trays. This causes the efficiency of devices to decrease and wear out prematurely.
corrosion and abrasion
Substances such as nitrogen and sulfur along with other products when they pass through the pipes and equipment due to exposure to speed, heat and pressure, cause corrosion and wear of the metals and equipment in the parts. Abrasions and corrosion caused by these materials will cause the loss of equipment and their thickness due to the passage of time. If these damages are not paid attention to and the thickness of the pipe is completely lost, it may cause breakage and tearing in the equipment. This can lead to accidents such as fires and massive explosions when it occurs during operations inside the refinery.
URAl's application
One of the applications of major repairs is to make fundamental changes in the part. The application of mechanical overhaul is not limited to a few specific branches. You can benefit from this type of repairs in all dimensions. Overhaul can prevent breakdowns leading to accidents. You can also extend the life of your device by removing metal rust through metal sandblasting.
how much time does ureal take?
One of the main concerns of people who intend to benefit from this type of service; The time required for the overhaul. Various parameters are involved in determining the overhaul process. Among the series of important indicators in this field, we can mention the type of piece. Another important factor in determining the duration of the overhaul is the type of repair process based on the part. The skill of the technician also plays a key role in determining the time of the repair process. In general, you can benefit from these services at a very low cost in a short period of time. In fact, major repairs can be done in a shorter period of time.
The benefits of Ural Diesel Generator
Overhauling a diesel generator has many benefits, including: Increase the life of the device Increasing the efficiency and effectiveness of the diesel generator Reducing maintenance and repair costs Increasing the level of safety and security Preventing environmental pollution
Urinal Diesel Generator Steps
Inspection and troubleshooting: At this stage, specialists identify existing defects and problems by carefully examining all the parts of the diesel generator. Dismantling: After troubleshooting, the diesel generator is completely disassembled. Repair and Rebuild: Defective parts are repaired or replaced. Assembly: After repairing and rebuilding the parts, the diesel generator is reassembled. Testing and Commissioning: Finally, the diesel generator is tested and commissioned to ensure proper operation.
cost of ureal
Estimating the cost of an engine overhaul period depends on various factors. These factors include the type, model of the device, the level of operation, existing defects and problems, and of course the salary of specialists.
Tosun company operates in the field of providing crane overhaul services. Just contact this group.